+7 (343) 295-85-80 +7 (343) 295-85-84

Rambler's Top100

Feedback

If you have any question or you are ready to make an order, please, contact us at: +7 (343) 295-85-80; +7 (343) 295-85-84

or use the following feedback form:

* - Fields are prefilled

Pneumatic hammer DMS6-M60 MH 549.00
and Drilling Bits

  1. Driver chuck
  2. Retaining ring
  3. Seal ring
  4. Seal ring
  5. Guide bushing
  6. Retaining ring
  7. Cylinder
  8. Striker
  9. Distribution tube
  10. Plug
  11. Back valve guide
  12. Spring
  13. Check valve
  14. Seal ring
  15. Seal ring
  16. Pin
  17. Top sub

 

TECHNICAL CHARACTERISTICS

Recommended borehole diameter, mm

159-178

Shank type

М60

Percussive capacity, kW

13...26,5

Operating air pressure, bar

14...24

Air consumption, m3/min

14,4..27,5

Diameter, mm

150

Length, mm

1018

Weight, kg

93,9

Connecting thread

API 3,1/2 Reg Pin

 

DRILLING BITS FOR PNEUMATIC HAMMER
DMS6-M60 MH 549.00
SHANK M60
12 SPLINE

AppearanceDescriptionNominal
diameter
of the bit,
mm
Gauge
buttons
angle,
degree °
CarbideNumber
of
flushing
holes
Length
L,
mm
Weight,
kg
gaugefront
KNSH-172 M60
MH 542.00
172 35 semi-sphere  3 330,5 23,5
9 х Ø18 8 х Ø18
KNSH-165 M60
MH 567.00
165 35 semi-sphere  3
330 23,6
9 х Ø19 9 х Ø16
KNSH-172 M60
MH 544.00
172 9 х Ø18 9 х Ø18 331 23,9
KNSH-178 M60
MH 540.00
178 9 х Ø18 9 х Ø18 330,5 24,5

Drilling bits KNSH-152…203 М60 can be used with pneumatic hammers of foreign origin: RH 550r 6”, RH 550w 6”

Phone: +7 (343) 295-85-80, 295-85-84, 295-85-82.

Address: 620024, the city of Yekaterinburg, 1 Simskaya str., room 401